With a little care you will have many cozy hours with your beeswax candle from apidae candles. Just follow my tips and you will have pure enjoyment.
- Always keep the wick trimmed to 1/2 cm. If the flame gets too high (over 2.5 cm), the wick needs to be trimmed. Too high a flame is caused by a wick that is too long. If the wick becomes mushroom shaped, it means the candle is using up wax faster than the flame can burn it. This happens when the wick is too long. Extinguish the flame, trim the wick and relight the candle. The secret of a perfectly burning candle is proper care of the wick.
- Keep the candle away from drafts. Wind causes the flame to flicker, causing soot.
- Keep the liquid wax free of contaminants (wick debris, matches). I recommend extinguishing the candle with a candle snuffer (dip the wick into the liquid wax and straighten it up again immediately). Blowing out your candle causes black smoke, which then settles on the warm glass. If you still get soot on the glass, wipe it off with a damp paper towel. Soot is easier to remove when the glass is still warm.
- The first lighting is the most important because candles have a memory! The candle remembers how far it has burnt towards the edge. Allow your candle to burn at least until the liquid wax has reached the rim. This can take up to four hours. Only light your candle when you have enough time to enjoy it. Extinguishing the candle prematurely will create a tunnel and shorten the overall burning time of the candle.
- Place the jar on a heat-resistant surface. My coasters are perfect for this. Don't touch the glass while it's burning. The glasses get very hot!
- For safety reasons, please remove any labels before burning.
- Never leave burning candles unattended.
- The specified burning time is a guide and varies depending on external conditions. Candles in glasses should not be left burning for more than 4 hours at a time.
- 100% beeswax candles are characterized by a white coating that develops over time. This is a quality feature and can easily be removed with a cloth.
All glasses and cups used by apidae candles are intended to return to their original purpose after the candle has completely burned down.
Once your candle has burned down, place the jar on a baking sheet lined with parchment paper. Preheat the oven to 80°C and put the glass in the oven for about 15 minutes. Remove the jar from the oven and use a paper towel to remove the remaining liquid wax and the wick base. Careful, it will be very hot! Never pour wax down the drain. Wax clogs the pipes. If the wick base cannot be easily removed, gently loosen it with a spoon. To remove any glue residue from the wick base, soak the glass in warm, soapy water. Wax residue can be easily removed with cooking oil. Then wash the glass with hot, soapy water.
Do not leave the oven unattended.